NEWS

The requirements of stone machinery for saw blade head

  • Categories:Company dynamics
  • Author:
  • Origin:
  • Time of issue:2020-10-13 15:56
  • Views:

The requirements of stone machinery for saw blade head

  • Categories:Company dynamics
  • Author:
  • Origin:
  • Time of issue:2020-10-13 15:56
  • Views:
Information
Stone machinery is a widely used equipment in the industry, which is favored by customers. The cutter head is an important part of mechanical sawing and has a huge impact on production. Today we will give you a detailed explanation of the requirements of stone machinery for saw blade heads.
 
The width of the cutter head should be grouped according to its size error, and the width error of the cutter head on the same saw blade should be controlled within 0.05mm. The cutter heads should be symmetrically welded to the sheet body, and the error of the side of each cutter head relative to the side of the sheet body after welding is not more than 0.08mm. The sharpness of the cutter head directly affects the cutting efficiency and service life. When using, you should choose the appropriate amount of cutting and sawing speed according to the different materials of the block. The sawing current should be controlled within 80% to 90% of the rated value, and the sawing sound should be smooth and smooth. Sometimes after a sharp cutter head is used for a period of time, it will be difficult to saw down, the current increases, and the sound becomes thicker. This is because the emery wears and falls off or the mixing is uneven during the manufacture of the cutter head, which makes the emery content of this layer insufficient. Effective sawing. At this time, the sawing performance must be restored after the emery is exposed.

Scan the QR code to read on your phone

News

Copyright © Lawn and Garden Products Co.,Ltd       鲁ICP备12027876号       POWERED BY WWW.300.CN

Copyright © Lawn and Garden Products Co.,Ltd  

鲁ICP备12027876号 POWERED BY WWW.300.CN

Lawn and Garden Products Co.,Ltd